Search results - "gable" |
Top Design View of 12'x16' Shed Plan8956 views12'x16' Shed Plan full elevation top view displays 6/12 gable roof.
|
|
Shed Building Front 12' Plan Design3553 viewsShed Building Front Plan Design displays a 12' wall with a 8'x7' door under the gable's 6" overhang. To the far left and right we see the roof's 12" overhang.
|
|
12'x24' Storage Shed Framing Illustration with Building Material List7601 viewsStorage Shed Building Material List
- Framing for a 12'x24' Storage Shed -
Shed Wall Framing
80 Studs
21 - 4x8 Wall Sheeting
6 - 2x4 Bottom Plates - Treated for Concrete -
12 - 2x4 Top Plates
3 - 2x10x10 - Optional - Solid Header Material
Roof Framing
14 - 4x8 Sheeting
11 - 12' Trusses
2 - Gable Trusses *
4 - 14' 2x6 Fascia
4 - 2x6x8 Gable Fascia *
* Gable Length may Vary Pending on Your Overhang Size - 8 - 12" Gable Overhang Figured
* Add Floor Framing as needed - Framing Materials are Estimated with a Concrete Floor
* Trusses may be hand framed or changed to rafters. If trusses you are building - Scrap Sheeting makes nice gussets.
For rafters - Add two 14' 2x8's Ridge Board, 30 2x6x8 Rafters, and 20 2x4x925/8 for Collar Ties and Bracing.
Framing Nails
Sheeting Nails or Staples
If no Anchor Bolts in the foundation wall add 18 1/2" x 6" cement anchors.
* Verify sizes and materials with your local building inspector and obtain proper building permits.
|
|
14'x20' Shed Wall Framing Materials4131 views14'x20' Storage Shed Wall Framing Materials
Nails or Nail Gun Fasteners
- 3" for framing
- 2" (approximately) For wall sheathing or 1 1/2" Gun Staples
* 72 Pre-cut Studs
4 - 14' Top Plates
8 - 10' Top Plates
21 - Sheets - 4 x 8 - O.S.B. plywood sheathing - Walls
Bottom Plates -Treated Materials If on Concrete
2 - 14'
4 - 10' or equivalent
- Tip - Purchase an extra bottom plate because treated materials often are bad.
16 sheets - 4 x 8 - O.S.B. or plywood sheathing for Roof
24 H or Roof Plywood Clips
9 - 14' Gambrel Trusses
2 - 14' Gambrel Gable Trusses = 11 Total
10 - 2 x 6 x 8 - Gable Fascia and Look Out Blocks
6 - 2 x 6 x 12 - Fascia and Truss Diagonal Bracing
3 - 2 x 10 x 8 - Recommended Option for Doorway & Windows Header
|
|
Shed Building 24' Left Plan Design2762 views16'x24' Shed Building Left Wall Elevation Design displays the plans 8' tall walls including a 36"x36" double hung window under the roof's 12" overhang. To the far left and right we see the roofs 8" gable overhangs.
|
|
Shed Building Plan 16' Rear Design2178 views16'x24' Shed Building Plan 16' Rear Design with a 5/12 gable roof slope.
|
|
Garage Building Plan 20' Front Design2226 viewsGarage Building Plan 20' Design displays a large 16'x7' garage door under the 8" eves of a 4/12 sloped gable roof.
|
|
30 Foot Left Design1613 views30 foot design displays 36"x36" double hung window. To the far left and right we see the gable roof's 8" overhang.
|
|
20 Foot Backyard Wall1483 views20 foot backyard view includes a 72" wide doorway under the 8" overhang of a 4/12 gable roof.
|
|
30' Right Design1224 viewsGarage Building Plans 30' Right view displays a 36" R.H. entry door with divided lights. To the far left and right we see the gable roof's 8" overhang distance.
|
|
Top Design View of 20'x30' Garage Plan1407 views20'x30' Garage Plan Top Design view displays a 4/12 gable roof.
|
|
20x36 Left View647 views20 foot left view displays 36"x24" sliding window under the 12" eves of a 6/12 slope gable roof.
|
|
|