| Search results - "sheet" |
12'x16' Shed Roof Framing Sheathing Quantity3989 views12'x16' Shed Roof Sheathing Quantity.
|
|
12'x24' Storage Shed Framing Illustration with Building Material List7601 viewsStorage Shed Building Material List
- Framing for a 12'x24' Storage Shed -
Shed Wall Framing
80 Studs
21 - 4x8 Wall Sheeting
6 - 2x4 Bottom Plates - Treated for Concrete -
12 - 2x4 Top Plates
3 - 2x10x10 - Optional - Solid Header Material
Roof Framing
14 - 4x8 Sheeting
11 - 12' Trusses
2 - Gable Trusses *
4 - 14' 2x6 Fascia
4 - 2x6x8 Gable Fascia *
* Gable Length may Vary Pending on Your Overhang Size - 8 - 12" Gable Overhang Figured
* Add Floor Framing as needed - Framing Materials are Estimated with a Concrete Floor
* Trusses may be hand framed or changed to rafters. If trusses you are building - Scrap Sheeting makes nice gussets.
For rafters - Add two 14' 2x8's Ridge Board, 30 2x6x8 Rafters, and 20 2x4x925/8 for Collar Ties and Bracing.
Framing Nails
Sheeting Nails or Staples
If no Anchor Bolts in the foundation wall add 18 1/2" x 6" cement anchors.
* Verify sizes and materials with your local building inspector and obtain proper building permits.
|
|
14'x20' Shed Wall Framing Materials4131 views14'x20' Storage Shed Wall Framing Materials
Nails or Nail Gun Fasteners
- 3" for framing
- 2" (approximately) For wall sheathing or 1 1/2" Gun Staples
* 72 Pre-cut Studs
4 - 14' Top Plates
8 - 10' Top Plates
21 - Sheets - 4 x 8 - O.S.B. plywood sheathing - Walls
Bottom Plates -Treated Materials If on Concrete
2 - 14'
4 - 10' or equivalent
- Tip - Purchase an extra bottom plate because treated materials often are bad.
16 sheets - 4 x 8 - O.S.B. or plywood sheathing for Roof
24 H or Roof Plywood Clips
9 - 14' Gambrel Trusses
2 - 14' Gambrel Gable Trusses = 11 Total
10 - 2 x 6 x 8 - Gable Fascia and Look Out Blocks
6 - 2 x 6 x 12 - Fascia and Truss Diagonal Bracing
3 - 2 x 10 x 8 - Recommended Option for Doorway & Windows Header
|
|
Gambrel 14'x20' Shed Roof Framing Plywood Materials4185 viewsRoof Framing Plywood Material Sheets for building a gambrel 14'x20' shed.
|
|
Horse Barn 36' and 60' Exterior Wall Framing Plan543 viewsHorse Barn Exterior Wall Framing Plan for building the 36' and 60' outside barn walls. The 36' walls display 10'x8' openings for the sliding doors and are sized between the longer 2x4 walls with 1/2" sheeting (36' - 3 1/2" - 3 1/2" - 1/2" - 1/2"= 35' 4"). With single support trimmers the header length for the garage door is 123". Double trimmers for your door opening side supports add 3" (Header length of 126"). The longer barn walls are sized for 1/2" plywood overlaps (59' 11" vs 60').
|
|
|
|
|
|
|
